Product name:50B quenching and tempering Steel specification
Thickness:1.2-600 mm
Width::1220-4200 mm
Length:5000-18000 mm
Notes:coil thickness ≤ 25 mm
[email protected]                   Contact Us


  Details:

C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C - Otai ...

DIN Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. ... C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C. Search for: C45 Round Bar | AISI 1045 ... Harden from a temperature of 820-860oC followed by water or oil quenching. Heat to 820 oC – 850 oC hold until temperature is uniform ...[PDF]

Heat Treating Guide - Continuous Cast Iron Bar Stock ...

on steel will work with Dura-Bar and because of the high carbon content, all grades have equal hardenability. Carburizing is not necessary, which can be a ... quenching. Tempering to 45 – 50 Rc will result in optimal wear resistance and material toughness. The

EN 10083 Steels for quenching and tempering - Steel …

EN 10083: Steel grades /numbers. EN 10083-1: 2006 Steels for quenching and tempering. General technical delivery conditions : EN 10083-2: 2006 Steels for quenching and tempering. Technical delivery conditions for non alloy steels COMPARE GRADES 1.0501 C35 1.0503 ...

S50C steel plate,S50C steel supplier,S50C Chemical ...

JIS G4051 S50C steel plate is one mainly of high carbon steel,for the high strength medium carbon steel,the cold-work plasticity is low,the welding performance,the hardenability are bad,but non-temper brittleness,cutting value still permissible.Generally under the normalizing or quenching,the tempering uses,uses in making the resistance to wear ...

Din Equivalent Materials | Steel | Alloy - Scribd

The range of International steel strip specifications is vast and it would be impractical to cover a fraction of them on this site. Below are listed the grades of steel that we have most frequently had requests for information submitted to this site. ... Carbon Steels For Quenching and Tempering Euronorm EN 10132 - 3 C22E C35E C40E C50E C60E ...

Material selection and product specification ...

Material selection and product specification. From Steelconstruction.info ... can be improved by the addition of Nickel. Hence, the chemical composition for each steel specification has been carefully chosen to achieve the required properties. ... and then allowing it to cool naturally (‘tempering’). Quenched and tempered steels are denoted ...

GB3077-1999 English Version | Steel | Heat Treating

GB3077-1999 English Version. Uploaded by Hermanto Supu. Related Interests ... . 6.4 Mechanical properties 6.4.1 Determine the longitudinal mechanical properties and hardness of anneal or high tempering of steel, by the test specimen with heat treatment, and the determination results should be accordance with Table 3. 6.4.2 The mechanical ...[PDF]

THE RIGHT CHOICE OF STEEL - according to the …

THE RIGHT CHOICE OF STEEL - according to the Eurocode - Oliver Hechler 1, Georges Axmann 1 and Boris Donnay 2 ... classification of steel grades is accordingly based on the minimum specified yield strength at ambient ... ArcelorMittal has developed steel grades to fully valorise the potential of quenching and self-tempering (QST) process. ...Authors: Oliver Hechler · Georges Axmann · Boris DonnayAffiliation: Arcelormittal

AISI 1018 Mild/Low Carbon Steel - AZoM

AISI 1018 mild/low carbon steel has excellent weldability and produces a uniform and harder case as it is considered as the best steel for carburized parts. ... Tempering. AISI 1018 mild/low carbon steel is tempered at between 150°C – 200°C for improvement of case toughness. ... Standard Specification for Powder Forged (PF) Ferrous ...

S355JR steel round bar, S355JR steel mechanical …

S355JR steel round bar, S355JR steel mechanical properties S355JR steel round ba r is belong to low alloy steel bar. S355JR steel is widely used in bridges, ships, power stations, boiler, pressure vessel, oil tank, lifting transportation machinery and so on.

Induction Quenching&Tempering Machine for 6m Steel Bar

Quenching&Tempering Machine, Induction Tempering Machine, Induction Quenching Machine manufacturer / supplier in China, offering Induction Quenching&Tempering Machine for 6m Steel Bar, Steel Bar Forging Induction Heating Machine (XZ-50B), Induction Equipment for Special Steel Online Heat Treatment and so on.

S275 S275JR Steel - West Yorkshire Steel

West Yorkshire Steel are suppliers of S275 steel plate. S275 is an unalloyed low carbon mild steel grade supplied as hot rolled. As a low carbon steel specifications S275 provides low strength with good machinability and is suitable for welding.

EN European Steel and Cast Iron Standards - Steel Number

Steel and Cast Iron Standards. CAST IRON: STEEL STANDARDS EN 1561 EN 1562 EN 1563 EN 1564 ... Steels for quenching and tempering EN 10084: Case hardening steels EN 10085: ... Specification for hot-rolled flat products made of high yield strength steels for cold forming

S275 S275JR Steel - West Yorkshire Steel

West Yorkshire Steel are suppliers of S275 steel plate. S275 is an unalloyed low carbon mild steel grade supplied as hot rolled. As a low carbon steel specifications S275 provides low strength with good machinability and is suitable for welding.

EN European Steel and Cast Iron Standards - Steel Number

Steel and Cast Iron Standards. CAST IRON: STEEL STANDARDS EN 1561 EN 1562 EN 1563 EN 1564 ... Steels for quenching and tempering EN 10084: Case hardening steels EN 10085: ... Specification for hot-rolled flat products made of high yield strength steels for cold forming

S355 S355J2 S355J2+N Steel - UK Supplier - Special Steel

Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of carbon steel grades.

ST52-3 steel - bb.450001

DIN ST52-3 steel Physical properties (avarage values) at ambient ... DIN ST52-3 steel Hardening Harden from a temperature of 860-890oC followed by oil or water quenching. DIN ST52-3 steel Tempering Normalizing temperature: 860-890oC. DIN ST52-3 steel Forging Hot forming temperature: 1050-850oC. ... A514 specification quenched and tempered high ...[PDF]

No Commodity Composition Mechanical Properties ... …

No Commodity Composition Mechanical Properties 1 Hollow Bar BS970 070M20 Tensile strength σb (MPa) ... quenching:840 tempering:600 Tensile strength: ≥600Mpa Yield strength:≥355Mpa ... No Commodity Composition Mechanical Properties[PDF]

Chemical composition, Mechanical, physical ... - Steel …

GBT 50B Steel Physical Properties by Longhai special steel - China steel suppliers E-mail: [email protected] steel-grades Chemical composition physical Properties standard download

2017 china Best red clay brick making machine/china clay ...

3)heat tempering treatment,high-frequency quenching to enhance the hardness of gears,axis,shaft and some other parts of clay brick machine. Best clay brick machine for clay brick factory Advantage:

DIN ST52-3 steel plate - bebonchina

DIN ST52-3 steel plate BEBON steel is DIN ST52-3 steel supplier,we have much experience in manufacture DIN ST52-3 steel, We could give the fastest delivery time on the base of our competitive price directly from our mill. if you need know steel grade feature,we can provide DIN ST52-3 chemical composition and DIN ST52-3 mechanical properties.

1.0045 Steel - Special Steel

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

shaft hardening suppliers and shaft hardening ...

seekpart› Custom Fabrication Services› MachiningVertical Shaft Hardening Machine. Details: Vertical Shaft Hardening Machine The Vertical solid high-frequency quenching machine is one of the complete set induction heating equipments of o...

Manusteelcn——China steel suppliers - Superior technology ...

There are links on the right hand site to companies and organisations that are able to offer more comprehensive steel specification data, or other pages on this site that contain more information on specific steel grades.

PJSC Alchevsk Iron & Steel Works - Plate

ASTM A709/A709M–09 Standard Specification for Structural Low-Alloy High-Strength Steel Plates and Sections and Structural Alloy Steel Plates in Quenched and Tempered Condition for Bridges. А573–70

16Mnq high performance steel structure bridge products ...

seekpart› …› Fasteners & Standard Parts› Other FastenersHome > Mechanical Parts & Fabrication Services > Fasteners & Standard Parts > Other Fasteners > 16Mnq high performance steel structure bridge 16Mnq high performance steel structure bridge ... normalizing and tempering , other conditions. ... we could supply more specification according to your request. 4 Executive standard: According to the ...

ASTM A333 | Pipe (Fluid Conveyance) | Heat Treating

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature ... and cool in air or in the cooling chamber of an atmosphere controlled furnace..025 0. followed by quenching in liquid and reheating to a suitable tempering temperature.... hold at this temperature for a minimum time in the ratio of 1 h/in. reheat to a suitable ...

50B quenching and tempering Steel specification:
50B quenching and tempering Steel specification also can be called as alloy structural steel. Alloy steel means this kind of grade contains some special alloy composition. Alloy steel plate application is very wide, as : Machine, pressure vessel, construction and so on .

 


  Related Products :

20CrNi seamless pipe stock

40Mn2 steel tubes use

34CrS4 steel plate exporters

41CrS4 grades manufacture